Hotel use of soap, drug soap, shampoo, shower lotion, conditioner, moisturizer, etc..
Soap can be made from 8 grams to 180 grams.
Shampoo shower lotion from 20 to 80 milliliters.
A variety of shampoo in large bottles, small bottles of shampoo
The film is composited with paper. Book certificate photo paper, wall paper.
PVC film and PVC film composite, some for the thickening of PVC film. Some are adding some kind of performance. Products include tablecloths, swimming pool stickers, family swimming pools, yachts, inflatable toys and more.
PVC film and cloth composite, such composite products are: raincoat, tarpaulin, light box printing cloth and so on.
PVC film and non-woven composite products: tablecloths, flooring materials.
PVC film and release paper with stickers self-adhesive products such as sticky car stickers and other products.
The compounding between the PVC films is to heat the two identical or different PVC films separately and finally heat them up together, pressing the embossed steel roller and the rubber roller, and then winding and cutting to complete the cooling. The thickness of the composite heating film is also different.
Some of the PVC film and cloth composites can be directly compounded. For example, a relatively thin grid cloth can be directly compounded with a PVC film. Such products mainly use a gap and stick the film and film together. Therefore, there is also sufficient peel strength.
If the cloth used is denser or 100% polyester fiber, glue has to be used, especially polyester fiber or nylon fiber. This requires a polyurethane-based adhesive to be applied to the cloth beforehand. If Brie has a certain amount of cotton fiber, it can be applied to the cloth with a relatively low-viscosity PVC paste to be able to contend with the PVC film.
Combination of PVC film and non-woven fabric also depends on what the fiber, if it is polypropylene fiber non-woven fabric available water-soluble adhesive, applied to the film and then combined with non-woven fabric on it, if it is polyester non-woven fabric can also be directly Composite with film heating. However, this compound temperature must be strictly controlled. Generally, the tight fabrics of polyester and nylon materials should be coated with a layer of polyurethane glue to meet the requirements for compounding.
The above products are produced in different equipment and process conditions are different. However, the pressure on the key components of the composite is enough.
The temperature is generally above 150°.
Beauty And Personal Care,Organic Body Wash,Leave In Conditioner,Organic Hotel Soap
Yangzhou Ruizhixing Daily Chemical Products Co., Ltd , https://www.rzxtoothbrush.com