[China] net wardrobe closet corner cabinet Introduction Introduction

Wardrobe: It is a cabinet and solid wood furniture for storing clothes. Generally common are divided into swing doors, cabinets and sliding doors outside the cabinet. It is one of the furniture commonly used in the home. The wardrobe consists of cabinet, door panel (sliding door or swing door), hardware (tie clip, drawer, pull basket, clothes rail, laminate buckle, pants rack, mirror, hinge, etc.). The general wardrobe cabinet is made of 18mm thick material (planing board, MDF, solid wood board, composite multi-layer board, finger joint board); and the door panel (the sliding door is made of 9mm wood material "UV board, double veneer, wave Plate, louver, painted board" or 5mm glass sliding door; swing door is generally made of 16mm or 18mm material); general hardware for the wardrobe manufacturer, is a matching, not produced. There are also a few merchants who produce their own hardware for wardrobes.

Wardrobe corner cabinet classification type

Sliding doors

Also known as sliding door wardrobes or "one" shaped overall wardrobes , can be embedded in the wall directly into the roof to become part of the home improvement. Divided into the inner push-pull wardrobe and the external push-pull wardrobe: the push-pull wardrobe is placed in the closet, the individual is strong, easy to integrate, more flexible, relatively durable, easy to clean, high space utilization; external push-pull wardrobe The wardrobe door is placed outside the cabinet, and most of them are tailored to the needs of the elements in the home environment, and the space utilization rate is very high.

Swing door

The swing door wardrobe is a traditional open style wardrobe that is connected to the door hinge and the cabinet by a pipe hinge, similar to the "one" type overall wardrobe. The grade is mainly based on the door panel material and hardware quality. The advantage is that it is much cheaper than the sliding door wardrobe. The disadvantage is that it takes up more space.

Open

The open wardrobe has a strong storage function and is relatively convenient. The open wardrobe is more avant-garde than the traditional wardrobe. Although it is very fashionable, the room neatness is relatively high. Therefore, always pay attention to the wardrobe cleaning. Basically, people have more clothes. So home designers have designed open wardrobes. To make full use of the height of the bedroom space, it is necessary to increase the available space of the wardrobe as much as possible, and the items that are often needed are preferably placed at an easy height, and the off-season items should be stored on the topmost partition.

Plate structure

It is a combination of double-finished panels of different sizes. Mainly composed of panel, backboard, side panel, foot line and door panel. Among them, the cabinet contains various characteristic small parts: blue, L frame, pants rack, push-pull mirror, lattice frame, laminate.

Wardrobe corner cabinet purchase points

1, first look at the selection of the wardrobe . Professional manufacturers use environmentally-friendly plates that meet national testing standards, and some manufacturers use inferior plates that have no test reports and pose a potential threat to human health. Therefore, to buy a wardrobe, we must first look at whether the merchant has a plate inspection report and relevant testing certificate from the national authority inspection department.

2. Look at the veneer of the plate . Some wardrobes look good on the surface, but with a light stroke on the nails, there will be noticeable scratches. These wardrobes are often made of surface-coated vellum paper or ornate paper sheets with poor abrasion resistance. The professional manufacturer uses the environmentally friendly melamine veneer with thicker immersion paint and high temperature and high pressure treatment, which has high surface strength, abrasion resistance and scratch resistance.

3. Look at the edge of the board . Professional manufacturers use precision panel saws to cut sheets, and there is no chipping around the sheets. After sealing around, it can effectively prevent the moisture in the air from invading the inside of the board. Some manufacturers have no professional equipment, not only the rough cutting, but also the obvious edge collapse. Others even cut corners and only sealed the front side of the board. The remaining unsealed surface absorbs moisture from the air, causing the sheet to swell, causing the wardrobe to deform and affecting its service life.

4. Look at the backplane structure . Professional manufacturers use a backing plate with a thickness of 5mm or more, melamine veneer to prevent the back plate from directly contacting the wall to absorb moisture on the wall. The mainstream custom wardrobe brands on the market are all connected by nail-type backplanes, which are not easily damp, moldy and deformed.

5, look at hardware accessories . Professional manufacturers use famous factory accessories, quality assurance. Accessories are often hidden, consumers are difficult to identify, and you have to carefully push and pull. Accessories are an important element of wardrobes, bookcases and sliding doors, and are important indicators for ensuring the comfort and durability of household products.

6, look at the manufacturer's anti-counterfeiting signs and services . Professional manufacturers have obvious anti-counterfeiting labels on the edge of the wardrobe, pulleys, and even the veneer and packaging bar code. The quality and maintenance are guaranteed, and consumers can use it with confidence.

7, look at the matching and systematic of furniture . Professional panel furniture manufacturing enterprises can not only make wardrobes, cloakrooms, bookcases, but also provide system home furnishing products such as shoe cabinets, wine cabinets, beds, dressing tables, bedside tables and rotating hangers. After the overall coordinated design, not only can consumers avoid the trouble of going east and west, but also the panel uniform, color coordination, style matching, and high furniture integrity.

Foam Tri-fold Mats

China Foam Tri-Fold Mats,Tri-Fold Pad,Tri-Fold Mat Supplier

Foam Tri-Fold Mats,Tri-Fold Pad,Tri-Fold Mat,Tri-Fold Mattress.

China Foam Tri-Fold Mats,Tri-Fold Pad supplier & manufacturer, offer low price, high quality Tri-Fold Mat,Tri-Fold Mattress, etc.


Foam Tri-Fold Mats,Tri-Fold Pad,Tri-Fold Mat,Tri-Fold Mattress

Shaoxing Shengxiao Cushion Goods Co.,Ltd , https://www.sxsunshinefoam.com