[ Chinese wardrobe net ] How to maintain the wardrobe to make its practical cycle longer, the following is a small tip for the maintenance of the wardrobe, hoping to bring help to the housewives. â—† Always keep the door clean and there should be no debris or dust in the track. When cleaning, use a semi-wet rag to wipe the cabinet and cabinet door. Never use corrosive detergent. The dust of the track can be cleaned with a vacuum cleaner or a small brush, and the metal parts such as the frame and the tie rod are wiped with a dry cloth. â—† Should prevent heavy objects and sharp objects from hitting the track, scratching the cabinet and door panel. The cabinet body should not touch water and other liquid solvents to prevent the edge from falling off. â—† Let it be breathable, or use dehumidifying agents regularly to avoid moisture and bacteria in the cabinet and clothing. Use less chemical-containing fragrances to deodorize the wardrobe because they are likely to cause damage to the wardrobe. â—† It is normal for the light rail door pulley to be used for a long time. To ensure the smooth and quiet sound of the pulley, please add some lubricating oil along the upper and lower pulleys every 2-3 months. â—† When the air in the living room or the weather is too humid, please open the doors and windows regularly and put a small bag of dry lime or other desiccant in the corner of the closet to prevent mold and deformation of the cabinet and door panel. â—† Do not place the closet in direct sunlight to prevent the wood from being deformed or cracked under the light. â—† Wooden wardrobes should be wiped with a clean rag. If it is dirty, use soapy water or a neutral detergent and wipe with a damp cloth. â—† When purchasing, choosing drawers and furniture with high cabinet tightness is the best strategy to reduce dust. â—† If the sliding door and dustproof strip are used for a long time, there may be slight degumming, and it can be glued with double-sided tape; the lower track positioner can be positioned with gaps, and the flat positioner can be used to align the positioner to the side panel and push to the tight seam. The position of the sliding door is inclined. If it is tilted to the right, the sign of the "loose" of the left bottom wheel or the "tight" sign of the right bottom wheel is adjusted. â—† When using the sliding door, be sure to check whether the handle is protruding. If there is a protrusion, press it first, otherwise it will hit the frame or handle. Ready Designed Table Clamp Or Desk Clamp We can make different sizes of Metal Desk Clamp,Steel Table Clamp,Metal Table Clamp,Screen Divider Clamp,Partition Clamp for you. Partition Clamp,Screen Divider Clamp,Metal Desk Clamp,Steel Table Clamp,Metal Table Clamp,Ready Table Clamp Or Desk Clamp For Lighting,Ready Table Clamp Or Desk Clamp For Camera,Table Clamp,Table Clamp Or Desk Clamp for Microphone MGX Metalworks Co., Ltd. , https://www.mgxmetal.com