When installing the wardrobe sliding door on the track, in the case of installing the wardrobe, the sliding door should be laid flat, and the track should be placed at the bottom of the sliding door at the middle of the door cover at the bottom of the sliding door. The next step is to confirm the middle position. Use the tape measure to mark with the marker in the middle; then use the upper track to draw the hole that needs to be fixed by screws and then drill, fix the two sides first, then fix the middle part, that is, complete the installation of the upper track. No matter whether it is a new wardrobe or an old wardrobe, there will be a lot of dust during installation. Before installing the lower rail, wipe the door frame with a rag. The position of the lower rail is the same as that of the appeal. The sliding door is placed in the upper and lower rails to adjust the position. To make the sliding door achieve the best sliding effect; then fix the position of the lower rail, clean the inner layer of the track with a brush, and finally tighten all the joints with a screwdriver. The key point of this step is that the upper pulley is between the rails, the sliding door is roughly fit at the door frame of the wardrobe, and then the sliding door is slowly lifted to put the pulley into the upper rail, and then one hand is forced to lift the sliding door, and the other is The hand pulls the lower pulley so that the lower pulley smoothly enters the lower track. The sliding door is installed, and the sliding door is protected. Finally, the anti-collision strip is attached at the sliding door to prevent the child from bumping. The installation method of the sliding door sliding door of the wardrobe is the three big steps, but it is relatively difficult to put the pulley. It is better to have two people to cooperate with each other to make it easier.
These bags are made from RPET which is produced from recycled plastic bottles. It's good for reducing plastic bottles rubbish to our ocean.
Nonwoven fabric is a kind of nonwoven fabric, which directly uses polymer slices, short fibers or filaments through various fiber mesh forming methods and consolidation technology to form a soft, breathable and planar structure of new fiber products. Non-woven bag compared with the advantages of traditional plastic bags: non-woven bag cheap and good quality, environmental protection and practical, widely used, prominent advertising position. Applicable to all kinds of business activities and exhibitions, is the ideal advertising promotion gifts for enterprises and institutions. RPET Pouch ,Recycled Polyester Fabic Bag,Recycling Pouch Bags, Low MOQ RPET Bag Suzhou Yuli Industrial Co.,Ltd , https://www.packageyuli.com [ Chinese wardrobe net ] wardrobe installation on the sliding door
Wardrobe sliding door under rail installation
Wardrobe sliding door installation
The raw material of non-woven bag is polypropylene, and the raw material of plastic bag is polyethylene. Although the names of the two substances are similar, they are far from each other in chemical structure. The chemical molecular structure of polyethylene has strong stability and is extremely difficult to degrade, so plastic bags need 300 years to decompose. The chemical structure of polypropylene is not strong, the molecular chains can be easily broken, and thus can be effectively degraded, and in a non-toxic form into the next environmental cycle, a non-woven bag can be completely decomposed in 90 days.
Non-woven fabric is not the need for textile process and made like cloth cloth products, also known as non-woven fabric. Because it is only the textile staple fiber or filament orientation or random support, the formation of fiber network structure, and then the use of mechanical, thermal bonding or chemical methods to strengthen can be made. Non-woven bags are mostly made of spunbonded non-woven fabric.
To put it simply, non-woven fabrics are not woven and knitted together by yarns, but the fibers are bonded together directly through physical methods, so when you get the sticky weight in your clothes, you will find that you can't pull out a single thread. Nonwovens break through the traditional textile principle, and has the characteristics of short process, fast production speed, high yield, low cost, wide use, and multiple raw material sources.
Laminated non-woven bag, the product adopts the flow mode, composite firm, in the composite process is not adhesive, feel soft, no plastic feeling, no skin irritation, suitable for disposable medical single, sheets, operating clothes, isolation clothing, protective clothing, shoe cover, and other health protection products production; This kind of cloth bag is called laminated non-woven bag.