Nowadays, the benzene-free and ketone-free inks are widely used in the industry. It is not a true environmentally friendly ink. It is very simple. The thinner is still an organic solvent. The water-based ink is the real environmental ink, but the water-based ink is not widely used in the industry, but Water-based inks are an inevitable trend in the future. What is the difference between the water-based ink and the solvent ink we use now? Therefore, I think the heater plays an important role in graphic production. However, some problems have also been presented during the practice test. For example, the problem of the copper plate of the printer is not well controlled, and it is not easy to dry, simple to fade, slow, the adhesion of the ink is not strong, and some papers are printed with ink. So is there a better way to deal with these problems now? The answer is yes. Imitation printing ink is also weakly soluble ink, so many people are worried that this ink is corrosive, so it is daunting to him. Yes, since it is dissolved in ink, the corrosiveness is inevitable, but the pH of this ink is not very high, weak base, and some taste. In fact, we use the general ink does not rule out the damage to the machine nozzle. If the quality of the ink is not good, it will damage the nozzle. I used a company's pigment ink to break the nozzle. So the question is how to look at this problem, if we are getting a good reward, it is still possible to dedicate something. Before printing, workers should use Dyne or Dyne to check the surface tension of the film material. The film material must have a surface tension of at least 42 dynes/cm 2 if good UV ink adhesion is to be ensured. If the surface tension of the film material does not meet the requirements before printing, the ink adhesion will be poor. Article source address: http:// Hotel Furniture Series,Night Table Parts,Dressing Table Parts,Lounge Chair Parts SHENZHEN CHANGJIANG FURNITURE CO., LTD , https://www.findcjf.com