Expanding the safety of equipment is related to the quality of training. There are strict requirements on the design, materials, production process and specifications of the equipment. Expansion of the base facilities must be planned and installed by professionals. In the process of expanding the use of equipment, it is necessary to set up clear safety notices and warnings, and establish a sound system of personnel post responsibility, and a sound system of security, security, sanitary inspection, maintenance of facilities and equipment, and personnel service post responsibility system. The development training instructors are not present, and the trainees should not have access to the development facilities and equipment. The instructors for extensive training should establish internal monitoring and documentation. All high-altitude expansion equipment adopts an independent dual-point dual-protection system. Users must hang two safety ropes during the use of high-altitude expansion equipment. Each safety rope is tied to a protective steel rope with a steel lock to ensure that two protective steel ropes There is a safety rope. The user must carry out ground protection during the use of high-altitude expansion equipment. The number of ground protection personnel for each safety rope must not be less than two and strictly follow the safety procedures to ensure the safety of the personnel in the sky. The high-altitude expansion equipment should be inspected before each use, and the joints (protection of the six clamps at both ends of the steel wire rope, whether the cable stays are loose, all screw connections) should be regularly inspected every month, and there should be sound regular inspections The registration system ensures the safe use of equipment. 1. After about 100 person-times of training, you should immediately check whether the structure of each part of the device can still meet the training requirements. If there are loose screws or damage, you should immediately eliminate the perfection before training. 2. Before each use, all parts of the fasteners, wire ropes on the corresponding uprights, wire rope clamps, pulley components, wire rope screws, bow shackles and other safety products must be inspected for wear and looseness. When the wear amount of safety products exceeds 1/10 of the original, it should be updated: if the wire rope has broken strands, the number of broken strands should exceed 1/10 of the total number of wire ropes. Tighten and lock the loose parts. Inspectors should wear safety belts and wear safety helmets during their work. 3. The anticorrosion treatment of the pole and beam should be done once every six months; the welding part of the wire rope lug should be inspected once a month; when the corrosion depth exceeds the wall thickness of the steel pipe l / 10, it should be replaced. 4. Climbing should fasten all rock points and climbing boards at least once every six months. Before each training, there must be a special person to check the rock points and climbing board. If any looseness is found, it must be tightened before training. The coupling bolts behind the rock slab should be tightened at least once every six months. 5. The hoop of the horizontal bar should check whether it moves freely on the beam before each training. If it is difficult to move, it should be greased in time. 6. The worm and worm wheel that adjust the width of the broken bridge should check whether they can rotate freely within the specified stroke before each training. If they find it difficult to turn, they should be greased in time. 7. Grease the wire rope at least once every six months. 8. The corners and welding seams of all equipment should be treated for anticorrosion every spring and autumn, and the anticorrosion treatment should be done before the rainy season in rainy and humid places. 9. All instruments are preservative treated every two years. During the preservative treatment, the instruments must be polished with 300 mesh gauze first, then brushed twice with primer and then twice with topcoat. Children's expansion equipment manufacturersThe company's Health Equipment Co., Ltd. mainly produces outdoor children's slides, kindergarten toys, children's furniture, outdoor expansion equipment, fitness equipment, naughty castles, etc. It is a technology type that integrates design, production, sales and after-sales. enterprise. Website:. Consultation telephone. Our company is happy to serve you wholeheartedly! Factory address: No. 16, Chuangqiang Road, Light Industry Industrial Park, Lucheng District, Wenzhou City. This fully lockable metal stationery cabinets with 2 doors will suit any office decor or home office for its iconic design.
This double door cupboards usually comes in 3 heights, and in gray, white, black colors.
Of course, you can choose optional colors per RAL No.
Stationery Cupboards for Sale,Two Door Storage Cupboard,White 2 Door Cupboard LUOYANG SHIDIU IMPORT AND EXPORT CO., LTD , https://www.ybshidiu.com
Office tambour cabinets are quite suitable for limited spaces.
Metal cabinet with glass doors helps to show off the inside belongings.
As a direct manufacturer, our team of experts will help you achieve the best solution.