Any operator who handles, moves, cleans, inspects, or stores cutters, embossing tools, foils, sheetfed, punching tools, or even rollers, anvils, or other support rollers can cause tools Damage to equipment, safety incidents such as casualties, etc., which are not related to the shape and texture of the tool (flat, rotating or flexible). In some extreme cases, some operators or tools seem to be inherently “injured†and are always more vulnerable or otherwise damaged than others. It should be specially pointed out here that the tools used in the post-processing stage of web label printing are usually cumbersome, bulky and not easy to operate, and the probability of tool damage or personal injury is much greater than other label processing. Any stage. It is easy to say. Actually, in the manufacturing stage, in the warehouse, in the production or tool storage process, whether it is moving or processing these precision processing tools, it is necessary to arrange well-trained and dedicated personnel, especially in the accidents. Post-processing stage. Therefore, it is recommended that the above areas and production processes should be strictly operated in accordance with all or part of the following requirements: Hard rotary cutters, embossing tools, metal foils, rollers and anvils are often bulky and are not easy to lift, move in or out of the production line, so special care must be taken during operation to avoid tool damage and personal injury. Flat, rotary or flexible cutters have sharp edges that can cause scratches in the workplace if not handled properly. In addition, the cutter may damage the blade during movement, operation or adjustment. When opening the package of a cutter or other tool, and repackaging these items for storage and transportation, if it is not handled properly, it may cause a safety hazard such as tool damage or personal injury. Cleaning and maintenance of the tool before storage can also result in damage to the tool if not handled properly. Workers may use incorrect postures when placing tools, adjusting or cleaning equipment, or performing other operations on the finishing line. If any object, hand tool or wrench is placed on or around the workbench of the press, it may fall and the working environment may be messy, which may cause damage to these tools or printing equipment. Workers wearing such work clothes (metal buttons, etc.), wearing jewelry (necklaces, watches, bracelets, etc.) will be scratched, cut and worn during operation, installation and start-up of the machine with these precision instruments. In serious cases, the operator may be injured. Negligence in the start-up operation of the machine, errors during operation, or incorrect pressure settings can result in damage to the printing unit or processing tool. If the maintenance methods are not proper, the maintenance is not maintained, or the storage conditions are not in compliance, the performance of these tools will be significantly degraded after a period of time. rope weaving, webbing furniture, polyester and olefin material make the rope are look natural and more comfortable when you touch on the sofa. rope weaving furniture, webbing furniture Golden Eagle Outdoor Furniture Co., LTD. , https://www.geoutdoorfurniture.com
BAIDU_CLB_fillSlot("879457");