Posted on

Model NO.: M28
High Press Run: 60, 000~100, 000
Thickness: 0.15~0.30mm
Certification: ISO9001& SGS Test Report
Offset PS Plates: Sensitive Plates
Printing Plates: Aluminum PS Plates
Graphic PS Plate: Offset Print Plates
Offset Plate Sizes: Positive PS Plates
Long Impression Offset Plate: Offset Print Plates
Trademark: CXK or OEM service
Transport Package: 0.15mm 100PCS/CTN; 0.30mm 50PCS/CTN
Specification: 650x550x0.30mm. 1030x800x0.30mm, 450x370x0.15 etc.
Origin: Guangdong, China
HS Code: 37013022

Guangdong C.X.K. Printing Material Industy Co., Ltd                 

-Offset Positive PS Plate 
 

High press runs Offset Positive PS Printing Plate
 
Specification of Positive PS Printing Plate
Photosensitive Coating:
Coated by imported photographic emulsion and resin, the plate provides outstanding alkaline resistance, superior stability, high sensitive, high resolution & wide latitude---- Positive PS Printing Plate.
 
Vacuum Ventilating Layer:
Decreased exposure time, and avoids the dots from exposure to vague--- Positive PS Printing Plate.
 
Hydrophilic Treatment:
Speedy ink-water balance and less water absorption. Superior water retaining capability prevents the non-image areas from scumming and avoids paper distorted----- Positive PS Printing Plate.
 
Multi Grain Layer:
Enhance water receptive property of the non-image areas, insure dotes reproduction, and, extend the run-length---Positive PS Printing Plate.
 
Anodic-Oxidized Layer:
After anodic oxidation process, the plate has longer run-length, and can better resists the corrosive effect of the correction fluid--- Positive PS Printing Plate.
 
Positive PS Printing Plate we can offer:
Good quality with our positive ps printing plate, it have been tesed by ISO, and we can offer the certificate with ISO9001,2000SGS.
Positive PS Printing Plate from C.X.K.:


   

To get best plate effect, please note the following while using CXK offset printing PS plate: 

1. Exposure
A. Light Source: Unseal under dark or yellow light. Iodine Gallium Lamp is suggested as Exposure Light Source. 
B. Exposure time: 60-80seconds ( based on: 3000W, 1m light distance, new light)
C. FUJI grey scale could assist to fix a best exposure time: 2ND step blank, 3rd step inked. 
Note: Please fix a reasonable exposure time according to actual light source, power, brightness, distance and all related situation. 

2. Develop
A. Process Time: 30-60 seconds. 
B. Solution Temperature: 25°C ± 1°C
Note: Please renew or supplement the developer regularly and pay attention to a proper solution density. 
 

Manual Patient Bed

Manual Patient Bed,Medical Patient Bed,Back Lifting Hospital Bed,Crank Manual Hospital Bed

Jiangmen Jia Mei Medical Products Co.,Ltd. , https://www.jmmedicalsupplier.com