At present, cold stamping technology has become a strong competitor of hot stamping technology, and cold stamping technology is expanding from the field of narrow-format flexographic printing to other printing processes, such as wide-format flexographic printing. Letterpress, web offset printing and sheet-fed offset printing, etc. Cold stamping technology provides new opportunities for printing companies. The biggest advantage is that there is little investment, or no investment at all. Another outstanding advantage is the high cost performance, which is also the biggest selling point of cold stamping technology. As a person in the industry said: "For customers, cold stamping technology has a high cost performance, which can help customers increase the added value of products, and it is very economical." In addition, because cold stamping technology does not need to make expensive hot stamping plates, so It is very suitable for the production of labels and proofs with short-run work and low quality requirements. However, compared with hot stamping technology, cold stamping technology still has certain defects in quality and needs to be further improved. Therefore, cold stamping technology is not very suitable for the processing of high-quality packaging and label products. Although gold and silver ink printing can also play a metallic luster decoration effect similar to hot stamping, and gold and silver ink printing technology has made great progress in recent years, but still can not reach the hot hot stamping or cold hot stamping The kind of strong visual impact. In actual production, the hot stamping technology can achieve the best stamping quality and stamping effect, but the cost is higher. Although the quality of cold stamping is also good, it is inferior to hot stamping, but the cost is lower. No matter which hot stamping technology you use, you should pay attention to these two hot stamping technologies, because the price of hot stamping is constantly lowering, and the quality of cold stamping is also constantly improving. Both hot stamping technologies are in continuous In progress and development.
short skate boards are usually 28-34 inches long and have a
width of 7-10 inches.
We have Wooden Skateboard such as Canadian maple, Northeast
Chinese maple, Chinese maple skateboard;bamboo skateboard; glass fibreskateboard
and carbon fibre skateboard.
We can OEM or ODM for you. Welcome to contact us, let`s go
on our cooperation and friendship.
Cruiser Skateboard, Custom Skateboard, Professional Skateboard, New Skateboard YONGKANG YISHANG INDUSTRY&TRADE CO.,LTD. , http://www.yes-trade.com
In general, cold stamping can usually be used for jobs printed on UV flexo printing machines. The equipment and materials required for the cold stamping process are as follows.
(1) Standard flexographic printing or relief printing unit.
(2) Photosensitive resin plate and anilox roller, and there must be enough spare anilox roller to choose from.
(3) The embossing roller with the hardness of HS90 must be able to be easily installed in the printing unit, and ensure that sufficient pressure is provided to ensure that the hot stamping is carried out smoothly.
(4) Hot stamping foil unwinding device and winding device. Pay attention to adjust the winding tension when cleaning the waste to avoid wrinkling or delamination of the hot stamping material.
(5) Hot stamping foil.
(6) UV adhesive.
(7) UV curing system. The UV curing system must be as close as possible to the imprinting device in order to cure the UV adhesive in time after printing and hot stamping. The power of the UV curing system is required to be at least 300W. The UV lamp and reflector must be kept clean and free of UV varnish and dust impurities, so as not to affect the curing effect of the UV adhesive.
(8) Peeling device. The peeling device is installed at the rear end of the UV curing system. In addition to peeling off the waste foil, the device can avoid the delamination of hot stamping foil before UV curing, and can also reduce the wrinkling and skew of the printing material.
In addition, in order to obtain high-quality hot stamping products and higher profit margins, skilled operators are also required to be able to deal with and solve various problems in the production process, especially various problems related to UV systems.
When a printing company decides whether to invest in cold stamping technology, it must combine the actual situation of the company to understand the situation of the company's printing machine, because the cold stamping process means that a printing unit should be replaced by a cold stamping unit, and a peeling device needs to be installed. If the number of color sets of the printing machine is not enough, it may affect the normal printing of live parts. In addition, it is also necessary to determine whether the work is suitable for the cold stamping process. Study the graphic carefully to determine whether it can obtain the desired effect after cold stamping. Printing companies can work with UV adhesive suppliers to test cold stamping, provide customers with more choices, and improve their ability to serve customers. On the basis of existing customers, it can also improve the company's own competitiveness and the potential for creating consumer demand for customers' products.