[ Chinese wardrobe network ] Do you know what is the sliding door? Sliding doors are often used in closets , and sliding doors are also called sliding doors. The sliding door is fixed on the track by a pulley, which is much more convenient than the usual swing door. Therefore, the most important part of the sliding door installation is the installation of the pulley. Next, we will introduce the installation process of the sliding door and the installation process of the pulley. Wardrobe sliding door Wardrobe sliding door pulley installation? Wardrobe sliding door installation process 1. Install on the upper rail. You need to place the track in the middle of the door cover, so carefully measure the size of the two sides. 2. Start positioning after measuring the size, and drill after positioning. 3, fixed on both sides, drill the hole in the middle. 4. Wipe it clean before proceeding to the lower rail installation. 5. Position the lower rail position, put the sliding door first in the upper and lower rails, adjust the position, and make the sliding door achieve the best sliding effect. It is best to have two or three people to install together. 6. Then fix the position of the lower track, and clean the inner layer of the track with a brush. 7, sliding door installation. First, gently lift the door up so that the upper pulley of the door enters the upper rail. Then one hand lifts the sliding door hard, and the other hand pulls the lower pulley, so that the lower pulley smoothly enters the lower track. 8. The sliding door installation is completed. The next step is to stick the anti-collision strip. The anti-collision strip can protect the sliding door. Wardrobe sliding door pulley installation? Sliding door pulley installation process 1. Take a frame and a lower seal and fix them with a set screw. 2. Place the fixed frame on the ground and arrange the sliding door on the frame. 3. Take another frame and snap it into the arranged sliding door. Fix the lower seal and the frame with screws. 4, snap into the upper seal, fix with screws, and fix the upper pulley at the same time. 5. After the upper and lower screws are fixed, fix the lower pulley in the lower seal with the traction screw to complete the installation. 6. Note: When installing the lower pulley, the pulley shrapnel is inward. Argan Oil Hair Mask For Dry Hair DELIN HAIR COSMETICS , https://www.hairdyecolorfactory.com