In the past year or two, because of the excessive lead in tap water, everyone has paid more attention to the health of domestic water. In addition to the quality of the water supply of the faucet, its installation and daily use have a great impact on our health. The few people did not notice: Different space to install the faucet Most families, regardless of space and usage needs, only bought many of the same kinds of faucets and installed them on the house. This is actually unscientific. A family can at least be equipped with three types of single-cold, cold-warm, and bubble-type faucets. Taps are divided according to their use. They can be divided into basins, kitchen sinks, bathtubs, washing machines and mop pool taps. In terms of function and structure, they can be divided into single-cold faucets, sensor faucets, warm-water faucets, and belts. Bubbler water-saving faucets, etc., basins, kitchen sinks, bathtub faucets generally use cold and warm type and a bubbler type, washing machine and mop pool faucet with a single cold type on it, balcony and other places generally do not recommend buying a belt The bubbler faucet can not only speed up the speed of flushing the ground drag, but also increase the flushing capacity, but instead it has a certain water saving effect. Hot and cold water taps can not be directly a water pipe Many people think that buying a hot and cold faucet at home but only connecting one water inlet hose is no problem. In fact, the ceramic valve core is a three-port structure. The water from two inlet hoses must be mixed before the water outlet from the faucet. Outflow, only one hot and cold water faucet will not be able to use, many people are not sure so it is that the quality of hot and cold control is not good, if not, there will be a flood of gold. Hot and cold faucet is the use of ceramic valve spool on both sides of the opening angle to control the mixing ratio of hot and cold water, so as to achieve water temperature regulation function, if your home really only a cold water pipe but bought a hot and cold faucet, I suggest you can pick The two water inlet hoses are connected, then one is connected to the upper corner valve, and the other is blocked with a wire plug. Faucet and water pipe must have angle valve Many people know that they need to install a faucet, but they don't know how to install an angle valve. The angle valve outlet and water inlet are at right angles of 90 degrees, which can play the role of connecting the inner wall water pipe and faucet hose and controlling the water flow switch. All hot and cold taps (hot and cold water inlet hoses) must use angle valves to connect with the water pipes, and quick-open taps such as washing machine taps, mop pool taps, etc. can be directly connected to the water pipes, so no corner valves are required. In general, each hot and cold faucet needs two angle valves to be matched with each other. In case the faucet is leaking, just close the angle valve and it will not affect the water in other places in the home. The appearance of the water dragon and the interior are regularly cleaned How long has your home tap not been cleaned? Although we use the faucet almost every day, few people pay attention to the faucet surface or even the internal cleaning. After installing the faucet, the surface of the fingerprint and other stains are recommended to clean once every other month, rinse the surface with a clean cloth with a soft cloth to dry; and the appearance of the brightness of the maintenance can be cleaned once a month with car wax. The cleanliness of the surface is for aesthetics, and internal cleaning is the most important factor that affects the service life. In addition, if there is a decrease in the amount of water or a water fork in the faucet, it means that the bubbler of the faucet is blocked. At this time, the bubbler should be removed and soaked with vinegar. Use a small brush or other tools to clean the debris. Then reinstall it. Taps are not ready to use Most people are accustomed to using it in the morning to unscrew and turn the faucet off, but generally speaking, before using the faucet the next day, it is generally necessary to let the water accumulated overnight in the faucet be released before use. For taps, people are “smell the lead and change their colorsâ€. In fact, no matter how good a faucet is, it is difficult to avoid more or less lead precipitation and pollution, but in general, due to the role of lead protective film inside the faucet, its content is greatly increased. Reduced to the standard level. However, the long-term retention of water in the faucet will cause the lead protective film to fall off, and the lead element will be precipitated when dissolved in water. Especially the traditional faucets and water pipes are more likely to rust and pollute the water. Therefore, when you get up early, you need to drain the yellow water from the pipes. In product selection, stainless steel taps are relatively healthy, but stainless steel taps will be more expensive. Big-name leader five years for a one-year change The house was bought, and the decoration was good. For everything in the home, apart from the big things such as home appliances, many things will be used for decades, so we will focus on the quality of home products, but like taps Products, even if used for many years are not bad, you should also replace them, because there will be different degrees of corrosion in tap water. For faucet products with better brand reputation, it can be changed every five years. If it is a niche product with little or no brand protection, it is recommended that it be replaced every year. For non-drinking faucets such as laundry, it can be used for a long time. It is not important at all, and it will be changed in 6-7 years. Drinking water and water are the lifeblood of our daily life. To protect your water health in daily life, we must pay more attention to the details of the installation and use of faucets, and fundamentally avoid the source of harm. <\p><\div> Since its establishment, Baklam has always positioned product quality as the core of the company's participation in market competition. It is a professional dining table chair, dining room dining table chair, dining room dining table chair and dining room dining table chair customization manufacturer. Dining table chair, dining room dining table chair, dining room dining table chair, dining room dining table chair customization, dining room dining table chair manufacturer Baklam , https://www.jmbaklam.com
