Live surface silk screen production process

Although there are many methods for surface screen printing, in practice, they often encounter simple surface printing and live jobs for printing. However, they often give up due to conditions and lose their economic opportunities. How can we solve this problem? Over the years, after practical application, using live-face screen printing methods, a large number of processed printing products such as latex plastic buckets, pure water buckets, washbasins, hot water bottles, cups, bowls, plates, and other products have been printed. At the same time, this method can be used to print signboards on automobiles and print on special-shaped planes. The so-called live-face screen printing, that is to say, the screen layout is removed directly to the surface of the printing material for printing.

First, the production of live surface silk screen version

First dry the sensitive text and graphic version, then remove it and cut it according to its size. At the ends of the screen, wood chips or aluminum sheets are used as the skeleton to adhere tightly with adhesive tape. It can also be directly cemented with viscose. In this way, the desired live silk screen version can be made.

Second, the living face printing method

According to the substrate selection of different printing materials for deployment. First, use a flat plate and a plate to mix the desired ink. Then, one person holding the live-faced silk screen in both hands, tightly affix the enveloping area to the surface of the substrate, and the other person uses a doctor blade to uniformly spread the ink on the ink-regulating plate. Place the ink on one side of the blade, and then place the blade on the plate for even squeegeeing. If the printed graphics area is too large, pour the ink on the plate according to the situation, but do not allow the ink to flow out of the substrate. Pay attention to the deployment of the ink should not be too thin, do not be too dry, dry and wet moderate as well. Small area printing and imprinting can be performed by one person by attaching the end of the back plate to the desired position on the substrate with a packing tape, and then pressing the plate tightly against the substrate with another hand. print. The attention must be lighter from the bottom of the tape. This is also true if two people operate the release method. Printing by this method has the advantages of convenient operation, flexible requirements for substrates, high capacity, and low energy consumption. The quantity can be more, less, with low cost, saving energy.