Huaying Successfully Launches Upgraded BII Multifunction Machine

After countless days of hard work by employees, Huaying has achieved new results: The BII type multi-function machine has been successfully upgraded! The machine for the upgrade of this model is a double-throw needle, a fixed-point coating device, a scraper trolley mechanism, a coil diameter of 1050mm, a follower roller device, etc., which also includes some old ones to re-upgrade, form or institution Modifications and so on, these are to improve the quality of our Huaying products, to more widely meet the needs of various processes, so that Huaying's products go wide and far.

This time, the equipment of Huaying was mainly used for the coating and compounding of pure aluminum film. Therefore, stricter and stricter requirements were required.

The difference between the new equipment and the old equipment and the advantages of the new equipment:

1. The winding machine is a double ejector mechanism. Advantages: The conventional ordinary ejector structure is suitable for the size of the model itself. The size of the model 1250 is about 1250mm, but less than 1250mm. Install gas shaft to normal use. But this time it was replaced by a double thimble structure. When the film width is less than 1250mm, the second layer of the sleeve can be extended so that the thimble can be extended again. It is also possible to use it without replacing the gas shaft and reduce the replacement of workers. Trouble, increased customer productivity. This structure is similar to the telescopic principle of a fishing rod.

2. Fixed-point coating device, advantages: Same as the color-printing device of the printing machine, instead of continuously applying the solvent to the film as in the conventional composite machine.

3. Scraper trolley mechanism, advantages: The previous scraper device is fixed on the wall board of the coating head, and the customer's process is also limited by this, but this time the scraper trolley mechanism is upgraded, and the scraper trolley is used in combination with the sealed scraper, which can To meet the needs of customers on the process, different processes use different forms of structure and use more widely.

4. Roll diameter is 1050mm. Advantages: This is a large-volume substrate. It is designed and manufactured to meet the requirements of customers. If it is in the normal form, the entire retractable roll will be too bulky, in order to show the overall structure. Not so huge, our engineers changed the structure slightly, making the structure more reasonable and compact.

5. Follow the kiss roller device. Advantages: The follower roller is equipped with a 1050mm roll diameter. It can be said that it is responsive because the follower roller is more stable and the success rate of docking is higher. Our ordinary docking success rate is small, but relative to our ordinary docking form, the follower roller has more advantages and is more perfect. Why does it correspond to the 1050mm roll diameter, because if it follows the traditional form of docking? When the 1050mm reel diameter is to be refuted, the ordinary arranging arm should appear bigger and more "strong", and the cutter will appear more "powerful." The use of the follower roller, it seems more "soft", will not let people see a shiny knife placed there, whether from the appearance or function, follow the kiss roller is even more superior.