eye-one display LT color calibrator

In 2006 and 2007, after the successive acquisitions of GretagMacbeth and Pantone, X-Rite, which is our protagonist today, X-Rite, has subsequently become a global leader in color science and technology. X-Rite is committed to developing, producing, marketing and supporting innovative color management solutions including color measurement systems, supporting software, color standards and services. Its products are widely used in printing, packaging, photography, design, video, automotive, coatings, plastics, textiles, dental care and medical industries. In the LCD field we are familiar with, X-Rite's color correction equipment often appears with professional display manufacturer Eizo's top ColorEdge series LCDs, even though it is equipped with the most accurate color performance S-IPS panel, 3D with 1 billion colors LUT color comparison table, 12-bit color driver IC and other configurations, it still needs i1 to ensure professional quality in color display.

After listening to the introduction just now, i1 seems to be far away from ordinary consumers. In fact, X-Rite has divided eye-one display color correction products into three categories: i1 display LT, i1 display 2, and i1 Pro for different target users. Today's introduction is the entry-level school color product i1 display LT. The wizard-based i 1 display LT is easy for novices to understand. At present, its Taobao price is around 1400 yuan.

eye-one display LT appearance and accessories

The overall appearance of eye-one display LT is similar to the mouse used in normal times, except that its reverse structure is different. Let us take a look at its appearance and accessories.

(Front of eye-one display LT)

(4 measuring holes on the back suction disk and center) [next]

Introduction to eye-one display LT

First install the Eye-One Match 3 software in the CD that comes with the i1 display LT, then connect the i1 display LT to the PC via the USB interface, and then double-click the software icon. After a while, we can see the interface shown below.

The i1 display LT connected to the PC will automatically detect which color correction devices are connected to the PC, and then only the monitor is connected to the PC as shown in the above figure. At this time, we can click "Check for Updates" to upgrade. Netizens can also view the help prompt on the right, and then we click the "right arrow" in the lower right corner of the above figure to enter the next step.

At this time, as shown in the figure above, the content of the left column becomes the entire test process, and i1 display LT will automatically detect which display device you are currently using. If it is an LCD display, LCD is selected by default, and CRT is selected by default. ... and then continue to click the right arrow to go to the next step.

According to different display devices and operating systems, choose the corresponding color temperature and gamma value, the color temperature is divided into 5000K, 6500K, 9300K three, 5000K warmer screen will be yellow, 9300K colder screen will be blue, 6500K in the middle The color temperature is more comfortable. Most LCDs use 6500K as the default color temperature. Windows users generally choose a gamma value of 2.2, while Mac users choose a gamma value of 1.8. There is also an ambient light source detection underneath. The light collection mask just introduced is required. It is also operated according to the steps prompted by the screen. It is more convenient to not introduce it here.

After placing the color calibration instrument, click the right arrow to enter the link shown in the figure below, then the wizard will prompt "Please adjust the LCD contrast to 100", and then click the "Start" button. Speaking of where some friends will ask, what about brightness? Need adjustment? For LCD, no adjustment is required, while for CRT, it will prompt "Please adjust the brightness to 0" after the contrast adjustment. Therefore, the brightness when using the LCD color correction is determined, and the ICC file generated after the entire process is completed can only be used normally at the brightness of the LCD model.

During the process of calibrating the contrast, please reduce the contrast of the LCD according to the results of the i1 test until the black bar enters the middle of the green area, as shown in the figure below. [next]

After calibrating the contrast, the next step is to adjust the color temperature. As shown in the figure below, two adjustment methods are provided: RGB setting & color temperature setting. The RGB setting is a higher-level calibration method. By adjusting the settings of each of the three primary colors Set value, of course, you must make sure that the LCD you use supports the independent adjustment of the three primary colors before choosing this item, otherwise please choose the color temperature setting method.

After about 30 seconds of testing, the screen will pop up as shown in the figure below, and then adjust the color temperature values ​​of the three primary colors of red, green and blue one by one through the OSD menu until the three are in the center of the green area.

After adjusting the color temperature, click the right arrow, i1 will directly enter the measurement link shown in the figure below, the entire test process takes about 2 minutes to wait patiently.

After the test is completed, an ICC file after color calibration will be automatically generated. We can click "Before and After" to observe the difference between before and after use.

As shown in the figure above, we can click the calibration to close to see the color of the screen before calibration, and then click the calibration to open to see the color of the screen after calibration. Finally, click "Complete Calibration" to finish the color calibration of the LCD, is it very convenient. After color calibration, the system will use the calibrated ICC file by default. If you do n’t want to use the ICC file, please right-click “Properties” —> “Settings” —> “Advanced” —> “Color Management” —> "Delete", it will return to the system default ICC configuration after restart.


Eye-one display LT trial summary

The entire color calibration process is introduced. I feel that eye-one display LT is not as complicated as you think. As long as you follow the help prompt on the right, you will basically encounter no problems. If you want to see the specific color gamut diagram and gamma curve, You need to buy a more advanced i1 display 2 or i1 Pro. If you just need to calibrate the color, dispaly LT is basically enough.

Since two years ago, wide-screen LCDs have become a must-have for installation, but the color expression of some TN-screen LCDs currently on the market is unacceptable to many consumers, and there are only a few models for civilian LCDs. In addition, taking into account factors such as manpower and cost, almost all finished LCDs are not carefully color-calibrated before leaving the factory, which causes many consumers to buy home LCDs with color cast and other problems. The author feels that especially for some large Internet cafes, spending more than 1,000 yuan with an i1 display LT color correction device will enable every LCD in the entire Internet cafe to benefit from it, and in terms of current trends, LCDs are being used by other new products. The possibility of replacement is very small, that is to say, no matter the Internet cafe upgrades the CPU, motherboard, graphics card, memory and other components, the LCD will always experience year after year like the evergreen tree, i1 display LT will naturally follow Can play its role for a long time.

Living Room Chairs

living room lounge chairs,Living Room Chairs,living room half recliner chairs

Guangzhou LoPhiDa Co.Ltd , https://www.gdwidinlsa.com