Cleaning and maintenance of air circulation system and other components of high and low temperature test chamber

Condensation care and troubleshooting for high and low temperature test chambers have been explained specifically in this article. This article mainly introduces the cleaning and maintenance of air circulation system and other components.

The high and low temperature test chamber also needs to clean the evaporator regularly, because the cleanliness of the samples varies, and under the action of forced air circulation, a lot of dust and small particles will condense on the evaporator, so regular cleaning is required. There are also waterway and humidifier cleaning. If the waterway is not smooth, the humidifier will foul, which will cause the humidifier to dry and burn, which can damage the humidifier.

The waterway and humidifier must be cleaned regularly. It is also necessary to set the temperature near the ambient temperature after each test, cut off the power for about 30 minutes, and clean the wall of the working room. When the machine is not used for a long period of time, the product should be powered on regularly every half a month.

Bar Table

sintered stone bar table,MDF bar table,bar table with black powder coating leg

Bazhou SKY Furniture CO., LTD , https://www.sky-furniture.com