Buying furniture should not only pay attention to the internal structure quality, but also carefully look at the "surface time" of the furniture, which is an important issue of common sense and the aesthetics of the furniture. The surface treatment of furniture usually has two kinds of board surface impregnation and board surface printing. The surface of the board is generally impregnated with urea-formaldehyde glue and trihydroamine, but the content of tri-hydrogenamine is about 10-15 yuan higher than that of urea-formaldehyde glue. Board printing is also divided into ink printing and ordinary paint printing, and the former is about 6 yuan higher than the latter. Here are some tips for identifying: I. Dip on the board : Look down and smell it. The smell of the furniture is very low and it doesn't irritate your eyes. This means that the furniture is on the line of “environmental protectionâ€. If you want to distinguish it is urea formaldehyde. Glue or tripolyamine, as long as the linen is stained with nitro thinner on the furniture, rubbing a few times, the survival of the fittest will be seen, not rough is the tripolyamine impregnation. 2. Board printing : You should not underestimate this small printing, often a small place to eat big losses, ordinary paint printing will change color after two hours of sunshine baptism, if it is dried all day, then even the pattern No more! If you print it with ink, even if you put it in the sun for a day, it won't be a problem. small side table,end table,modern side table,minimalist side table Foshan Poesy Furniture Co., LTD. , https://www.poesyfurniture.com