The identification of eucalyptus should be said to be not very difficult. With the naked eye, there is little wood similar to it. The texture of the eucalyptus is clear and there is no muddy water. The elm is often large, so the wood is well-proportioned and the texture is smooth. The common single board in the beech furniture is the case, and the wide and a half feet and the longzhang are common. The texture of the eucalyptus is beautiful, so the craftsmen have the consciousness to use it. The doors are usually single plates, the slabs are cut into two, and the two doors are turned to the left and right. The tower shape is the best, commonly known as the pagoda pattern. The double treasure tower door is the top grade in the cabinet.


The eucalyptus texture is similar to the huanghuali wood, and the close view is far from the same. The yellow pear wood is fine and the eucalyptus is slightly rough. The multi-curve changes of the yellow rosewood texture, the regularity of the elm. The coffin has no "grimace" of huanghuali wood, and there are few scorpions.


The amount of eucalyptus is very heavy, comparable to huanghuali wood. Due to the dense texture and high hardness, it is brittle and hard, and construction is not easy. The eucalyptus is large, and the white wood of the eucalyptus is red with a high white deformation rate. It is the first of all kinds of wood, especially Nanmu Beiyun, and almost every piece is deformed. Some furniture was shipped from Suzhou to Beijing, and it began to be deformed in just a few weeks. The change was big and unimaginable. I once saw the bolt of a rounded cabinet, which was twisted more than 100 degrees from top to bottom, so that the copper piece of the bolt was twisted into the cabinet, which was incredible.


The northerners did not know the coffin in the past, and they called it Nanxun. The eucalyptus is a small leaf arbor, and the leaves are very similar to the scorpion. Among the northern country furniture, the coffin is a large one; its status is equal to that of the coffin in Jiangnan. Both types of trees have a number of heights, but the texture is different, but it is a smooth and easy to understand. The smoothness of the eucalyptus texture is composed of extremely small brown eyes, and the smoothness of the cypress is eager to pursue. Great effect. It is easy to get the above feeling when the two kinds of wood are put together.


The eucalyptus is divided into jaundice and blood stasis. Wang Wensheng, Huang Qi is a common coffin, for the bulk, blood stasis is much less, the color is dark red, the old ones are not careful to be confused with mahogany. Blood stasis is heavier than jaundice, and the hardness is higher. It may be that these varieties are not as thick as jaundice, so there are many small pieces of bloody furniture, and the large cabinets, big beds, and big cases are almost invisible.


The age of eucalyptus furniture production is long and the time span is very large. Unlike the furniture such as huanghuali and mahogany, there is a clear time span. In the long years, Elm furniture has always been persistently showing its own advantages. In the late Ming and early Qing dynasties, the furniture of the eucalyptus furniture traced the charm of the huanghuali furniture. After the middle of the Qing dynasty, the eucalyptus furniture was transferred to the mahogany furniture with full commercialization tendency, and still played a role of hard work. There are many varieties of eucalyptus furniture, and the same can be found with Huanghuali furniture as a reference. With reference to mahogany furniture, you can still find the same ones.

Filling And Linking Technology

Helper has designed different filler series for small scale producer, medium sized business, and industrial enterprises,such as vacuum filler,piston stuffers.

---The vane cell feed system, together with vacuum pumping system, guarantees a long service life and the highest product quality.

---Mechanical filler is newly designed by our feeding technical team and it represents a new beginning of Chinese mechanical filling machine.

---Pneumatic filler is the most economical solution for the beginning of small scale producer with frequent changes in the product range.

sausage linking system,sausage hanging system:

The sausage linking and hanging system is the advanced solution to hang the sausages immediately after twisting-off. The workers handle easily the hanged sausages to smoking step by using a hanging stick. A simple twist linking device is also available to the filling machine to realize automatic twisting products production.



sausage filler and linker series

Automatic Sausage Stuffer,Vacuum Filler,Sausage Linking System,Sausage Hanging System,Piston Stuffers

Helper Machinery Group Co., Ltd. , https://www.ihelpergroup.com