Precautions 1 Avoid violent shocks and impacts to prevent the glass door from cracking. 2 When the intelligent artificial climate box is transported, the inclination angle shall not be greater than 45 ° C to avoid damage to the refrigerator. 3 The artificial climate incubator should be far away from the source of electromagnetic interference, and the ground wire of the socket that supplies power to the lighting box should be grounded. 4 The artificial climate box should be installed in a place not exposed to direct sunlight, and there must be sufficient ventilation. 5 The artificial climate box should be installed on a solid and flat ground, away from heat sources and the surrounding environment is not prone to high humidity. 6 Do not adjust the humidity setting value too low, so as not to stop dehumidification. 7 The humidifier water tank must use distilled water or purified water, the amount of water should not be less than 1/3 of the volume, be careful not to overflow when adding water, once spilled or spilled, wipe with a rag to prevent water from flowing into the equipment and causing damage. 8 Axial fan is directly above the working room. Do not block the fan when placing objects to avoid uneven temperature caused by poor ventilation. 9 Before the equipment is idle, remove the water from the humidifier water tank and allow the moisture inside the equipment to completely dissipate. Before closing the door, make sure that the inside of the box is completely dry. 10 Before moving the equipment, the water in the humidification tray should be emptied. Spilled or spilled water may cause electric leakage or electric shock. 11 Do not use sodium chloride solvent or other halide solution to clean this equipment, because it may cause rust. 12 If humidification is not required, set the humidity to 0% RH and drain the water in the tank. 13 If the ambient temperature is low and the set temperature is high, the measured temperature cannot reach the required set value for a long time, please turn the cooling capacity switch on the panel to the low position.
Rim cleaner advantage: Strong removal of stubborn brake powder attached to the hub.Wheel hubs that have never been cleaned and maintained can also be maintained in a short time. The room is clean and can be used on the surface of glass. Removal of stubborn stains and oxides adhering to glass surface.
As for rim&tire clean, using iron cleaner and rim cleaner , using chemical sprayer bottle or foaming sprayers to spray, together with wheel cleaning brush .
And then wheel coating and tire wax ;For coating, the accessiores included coating applicator, sudue cloth .
For tyre protect, there are two types of wax: water-base, oil-base. using wax applicator and spray bottle to work :
If you wanna know more about car care supplies, pls mail us. Ceramics Coating Series,Ceramic Coating,Ceramic Car Coating,wax wheel,wheel guard,,rim & tire,wheel woolies, tire shining SGCB COMPANY LIMITED , https://www.sgcbautocare.com
Iron cleaner: Reaction only with iron powder and rust, not through. Over-corroded iron powder, rust, but solid. The transformation of liquid iron into liquid iron can be thorough. Dissolved iron powder, rust, in rusty parts. Produce more obvious chemical reactions.
Shanghai Haozhuang Instrument Co., Ltd. has developed the LNB brand artificial climate box, which is energy-saving and environmentally friendly, leading the country. Professional manufacturing is more secure and affordable