Small filling machine | Semi-automatic quantitative paste filling machine

Small filling machine | Semi-automatic quantitative paste filling machine

Product Name : Semi-automatic Paste Filling Machine

Scope of application: The filling machine is a semi-automatic paste filling machine. It is an ideal filling and filling equipment for daily chemical industry, pharmaceutical industry, food industry, ink industry and coating industry. --dt21jx

Automaticity : Mascara filling machine can be divided into semi-automatic type and automatic type according to the degree of automation. Semi-automatic needs artificial bucket, manual pressure cap, etc. Fully automatic, it can save artificial bucket, gland and other steps.

The main performance and features:
1. The ink filling machine is a kind of filling machine for filling high-concentration fluids in the DG semi-automatic piston filling series. It uses the three-way principle of the cylinder to drive a piston and rotary valve to extract and play high-concentration materials. , And with the reed switch to control the stroke of the cylinder, you can adjust the filling volume.
2, the device has a simple and reasonable structure, simple operation, easy to understand, high accuracy.
3, the design is reasonable, compact models, easy to operate, pneumatic parts are used in Germany FESTO and Taiwan AirTac pneumatic components.
4, the material contact parts are made of 316L stainless steel, in line with GMP requirements.
5, filling volume and filling speed can be arbitrarily adjusted, filling precision.
6, filling bored using anti-drip, anti-drawing and lifting filling device.

Paste filling machine http://
Automatic paste filling machine http://
Small toothpaste filling machine http://
Hair removal cream filling machine http://
Automatic filling machine http://
Mascara filling machine http://DG-X.asp
Filling machine http://
Edible oil filling machine http://

Anti-counterfeiting technical parameters:
Voltage: 220/110V 50/60Hz
Power: 10W
Rated pressure: 0.3_0.6MPa
Filling speed: 10_30 bottles/minute Filling accuracy: ≦±1%
Model DG60 DG125 DG250 DG500 DG1000 DG2500 DG5000
Fillable range ml 5_60 10_125 25_250 50_500 100_1000 250_2500 500_5000
The optimal filling range ml 25_60 50_125 100_250 200_500 300_1000 500_2500 1000

Equipment Usage Notes :

1, the machine is no power equipment, normal gas source is 4-6kg
2. If overflow phenomenon occurs in the injection nozzle, press the safety emergency stop switch to ensure that the workshop is tidy.
3. Do not wash the machine directly with water when washing or washing the machine.
4, the machine gas path is simple, not arbitrarily dial.
5, when the cylinder head can not be returned due to improper operation, please press this button to re-set.

Cleaning and maintenance of equipment : Before the operation, it should be thoroughly cleaned. Wipe the oil or dirt with a non-woven soft cloth and cleaning agent, then wipe dry with a non-woven soft cloth. According to the GMP requirements, check whether the contact parts of the equipment and materials meet the corresponding cleanliness requirements, and if not, re-clean and dry. The cleaning method is based on the process requirements.

The safe operation of the equipment is:

1. The filling action of the machine is divided into two kinds: automatic and manual. When the height of the machine is manual, when the manual is adopted, the user only needs to use the bottle mouth to push the tongue, and then start to suck the material and pay attention not to withstand the tongue when filling. When using the automatic, the bottle must be placed under the discharge port, and the filling switch should start dispensing immediately after the switch is turned on, and the bottle should be replaced in time.
2. When it is found that the measurement is unstable during filling, check that the feed check valve may be trapped by debris, resulting in loose seal and affecting the filling amount.
3, the lower part of the cylinder leakage, indicating that the piston seal wear, need to replace the sealing ring.