A strapping machine (bundling machine) is a machine that uses a strap to wrap the product or package, and then tightens and melts the two ends by thermal effect or connects with materials such as buckles. The function of the strapping machine (baler) is to make the plastic tape tightly adhere to the surface of the packaged package, to ensure that the package is not scattered due to the unbundling of the package during transportation and storage, and it should also be neatly and beautifully bundled. The vacuum packaging produced by our company is kept in a film bag, and the air in it is exhausted to make the product nearly completely oxygen-free. It can prevent moisture, dust, rust and other functions. It can be said to be the best packaging with safety function and anti-pollution. The plastic tape on the reel is first fed into the storage tape box through the pre-feeding device, and then fed into the track by the tape feeding wheel. After the bundling is started, each bundling action is automatically performed in accordance with the procedure of the automatic baler in accordance with the following procedure. 1. Rewinding and tensioning: A chuck rises to clamp the plastic head, and the feed pulley reverses the rewinding, returns the excess plastic tape back to the storage tape box, and tightens the bundled object. Subsequently, the robot grips the plastic belt and tightens the package further to the adjusted tightness. 2. Cutting tape bonding: the guide plate exits between the two layers of plastic tape, at the same time, the ironing head is inserted between the two layers of tape at the same time, then the second chuck rises to clamp the other end of the plastic tape, the cutter cuts the tape, and pushes the tape head The scalding head contacts with it, melts (surface) when heated, and then the scalding head quickly withdraws, the cutter continues to rise, presses the melted two layers of plastic tape on the pressure plate, cools and solidifies, and the two tapes are bonded (YKM-WY The machine has no scalding head, start friction to complete the bonding). 3. Unpacking: The pressure-bearing plate exits the strapped plastic band, and the chucks are reset to complete the strapping. 4. Belt feeding: The belt feeding wheel rotates forward to feed the plastic belt from the storage box into the track, ready for the next bundling. 5. Uninstall. The above is the process of single-track bundling. When the machine is in the linked state, the belt tensioning program will be directly entered after the tape is delivered. Plastic Dish Rack,Plastic Dish Drainer,Dish Drainer,Dish Strainer Jiangmen Jianghai Jianshang Houseware Co.,LTD. , https://www.jianshanghouseware.com
The automatic strapping machine (automatic strapping machine) series products produced by our company have achieved continuous and reliable strapping, the plastic tape is close to the surface of the package, the joint is firm, the electrical safety of the machine, and the work noise and smoke do not affect the health of the operator.