Solid wood siding production process: Bottom sheet processing It is understood that the manufacturer's bottom plate area should adopt scientific and standardized management methods, especially in environmental protection control, there are three unique features: 1. Grasp the incoming material inspection. In the raw material inspection process, the raw and auxiliary materials suppliers are first screened to establish the qualified manufacturers, and then the materials with the lowest formaldehyde content are selected, and the E1 grade plates and the benzene-free sprayed materials are used to meet the environmental protection requirements from the source; 2, production quality and quantity. In the production process, we ensure the quality of our products and reduce the use of raw materials containing harmful substances. 3. Constantly try to innovate. It is to use new materials, new processes, constantly update products, improve production technology; professional good text, in the door industry vision. 4. Pay attention to environmental issues. Environmental protection is also an important part of the production process. Environmental protection is not a slogan, but it is to be proved by actual actions. Hand carved The siding is hand-operated, and the carpentry master has to engrave a pattern for half an hour. The reason why the solid carved furniture is expensive and long-lasting is here. Professional good text, in the door industry vision. To sum up, the whole process of carving is divided into 4 steps: pen drawing, initial carving, fine carving, and polishing. When carving: Each hand-carved worker holds more than 20 kinds of carving tools and drills, and engraves various flower patterns on the solid wood bed legs and bed back parts, which is very beautiful. After carving: From the finished carved parts, no hand-carved pattern can be copied, because each one is carefully carved by hand, especially precious. Painting and polishing Painting should be done in a lot of workshops, sanding, sanding, spray primer, repairing and polishing, spraying medium paint, foil, topcoat and so on. Spray primer 2 degrees, color correction (wooden, wood color difference treatment), painting, polishing, and then hand-painting three degrees, repeated grinding six or seven times, and finally the topcoat. If it is a product with gold and silver foil processing requirements, it must be processed before the topcoat. Look at the painting process, as simple as brushing the primer and polishing, you need to paint the experience and level. The solid wood texture is painted and polished, and the pattern will be revealed slowly. According to the original structure of the wood grain, the local polishing is carried out, so that the pattern is deep and shallow, and it looks more three-dimensional and beautiful. If you enter the closed workshop with gold foil and silver foil, the wood products of the original color will be reflected in the gold-plated silver. The thick European flavor will be reflected. Each foil is about 20cm×20cm, all made by hand-painted. This is purely technical, and no collage experience of more than ten years is not enough. From semi-finished products to finished products If the solid wood siding is not machined, the manual part will pass through more than 30 manual processes, which shows that the process is cumbersome and fine. package Packaging is the last step before the finished product is completed, and it is also a more important part of the product. The packaging process includes simple assembly of the product, wrapping, wrapping fabric, hardware assembly, packaging production, product inspection of the product, and product packaging. Fresnel Screen Ust,Fresnel Screen,Fixed Frame Projector Screen,Alr Projector Screen Ust Dongguan Aoxing Audio Visual Equipment CO.,Ltd , https://www.aoxing-alr.com
