Stainless Steel Kitchen Cabinet outdoor kitchen cabinets,kitchen cabinets near me,unfinished cabinets,stainless steel kitchen Guangdong Planet Cabinetry Co., Ltd. , https://www.cnplanetcabinetry.com
First: Choose a good and compatible ink addition. After many customers use their own inks, because they are cheap or convenient, they buy some ink and add them to the CISS. They think that even if you add any ink to the box, they ignore the use of CISS. The key point is ink. After adding ink, the printing often appears jamming, disconnection, and color cast. Therefore, we still try to select high-quality ink. In addition to good quality, we must also pay attention to whether the added ink is compatible with the original ink. Many customers have caused the nozzle corrosion and agglomeration to clog the nozzle due to the reaction between the two inks.
Secondly, when adding ink, do not put the outer box high enough for convenience of drawing. This will lead to unbalanced pressure. The nozzle caused by ink overflowing from the nozzle will short circuit and burn the motherboard.
Thirdly, before adding ink, close the ventilation hole of the CISS first, then add ink to the ink injection hole, and then restore the original state. After the ink hole is plugged, the ventilation hole is pulled out. Remember that there cannot be too much ink in the ventilation chamber. If the ink level on the vent hole is too high, the ink pressure will change and ink ejection will occur.
Fourth: Before the ink-jet integrated printer is used to add ink, it is best to remove the ink supply from the machine and then add the ink. Even during the use of pressure, the pressure is always in balance. Suddenly adding ink to the cartridge cartridge will cause pressure imbalance for a short period of time. There will be ink overflow from the nozzle and the cartridge circuit will be short-circuited. Therefore, it is recommended that you remove the connection and then add ink. , After adding the inner box and outer box after pressure equalization and then on the machine, if the ink overflow can use toilet paper dip nozzle nozzle ink until the balance, and then on the machine, pay attention to wipe the clean cartridge before the metal contacts.
Most inkjet printers now use continuous ink supply systems, which we will abbreviate as "CISS". The main features of CISS are the convenience of adding ink and the extremely low cost of use. However, we should not underestimate the simple action of adding ink. Many users cause unnecessary losses when they add ink because of improper habits. Here's a brief summary of the following points: