Radiator Cover,Custom Radiator Covers,Wooden Radiator Covers,Adjustable Radiator Covers DUOBUY TECHNOLOGY SHANDONG CO., LTD. , https://www.dbtfurniture.com
When consumers buy furniture, they are puzzled that there is no obvious difference in the appearance of the furniture, but why are the prices far apart?
In fact, there is a big difference in the materials used in furniture production. Some manufacturers have many traps in the production of furniture, such as cutting corners and stealing columns, which need to be carefully identified to be seen.
The trap uses a substrate that is not dried and insects using a poor quality substrate. Such a furniture has a high moisture content and is highly susceptible to deformation or cracking after the finished product. Furniture made from decaying or worm-eaten wood can seriously collapse furniture.
Trap two-substrate hybrid assembly Since the wood-based panel furniture adopts the method of veneer decoration on the outside of the substrate, although the parts of the furniture cabinet have the same appearance, some of the substrates in the furniture are moved by the manufacturer. For example, some furniture cabinet front and door use melamine board that meets environmental protection and quality requirements, while the back panel of the cabinet uses large core board with more formaldehyde emission.
Trap 3 makes cut corners. Because the wood-based panels used in panel furniture are all made of adhesive bonding, they are very sensitive to water, so their waterproof performance must be ensured by the veneering and edge sealing treatment of the board. In order to save costs, some manufacturers do not seal the joint between the inner panel and the board of the furniture. On the one hand, the furniture is broken by water, and the formaldehyde in the material can not be fully blocked, which causes the furniture to have a heavy formaldehyde smell.
The trap four hardware was replaced in the furniture installation to replace the cheap hardware and cut corners. For example, the counter mirror of a large closet has no back panel, no beading, and is only positioned with a nail. This practice of cutting corners and cutting materials can easily cause the mirror of the counter to be broken.
Tips:
When purchasing furniture, you should carefully observe the furniture samples, and the guide purchase lady asks about the material type and brand. When signing a furniture purchase contract, the sales personnel are required to indicate the contents according to their introduction. Don't replace the color, type or simple phrase “consistent with the factory sampleâ€, so that the contract is signed, so that the inferior furniture manufacturers have no chance.
In recent years, the decoration market is mixed, and inferior quality furniture with poor quality, rough production and serious defects often enters the market, making it difficult for consumers to distinguish between fake and inferior. Most of the inferior furniture generally has the following serious defects. Consumers should pay attention to the identification when purchasing furniture: