Preheating of the preforms: The heating heads are fed into the preforms automatically and successively to obtain the preforms. The preforms rotating at a constant speed are continuously heated through a special heating zone to obtain precise control of heating. The temperature distribution is even and reasonable. Stretch blowing: The cam mechanism accurately controls the opening and closing of the mold. The simple formwork mechanism makes the replacement of the mold more convenient and quicker. Special mode-locked pressurization system makes the mode-locking fast and stable. The special structure of the mouthpiece and the original blow bottle control technology have improved the yield. Forming the bottle: The robot automatically removes the bottle from the mold and accepts the quality inspection. The bottle that meets the quality requirements is transported to the belt, unloaded and stored in the bottle or online. Preform transport mechanism: A unique preform transport mechanism for the preform shaft, which ensures that the preform does not run upside down when heated. High-speed operation mode-locking mechanism: The patented arc of independent intellectual property rights is a mode-locked structure, a special mode-locked pressurization system, and high-speed operation is stable without noise. Hot Filling Bottle Forming Mechanism: When blowing hot filling bottles, a three-way circulating special design distributor is used to evenly distribute the different required water/oil temperatures to different parts of the mold, so that the crystallinity of the bottle can reach the best effect. Lightweight and energy-saving blow-molding system: The combination of cold air and hot air is used to force cooling of the bottle mouth and drive shaft during heating to achieve the best cooling method. Inducing air in the heating box to overcome the air convection, to ensure the uniformity of the preform heating temperature and prevent the preform surface from overheating. Energy-saving sealing machine blown air combination valve: non-ducted connection of control valve, compact structure, simple commissioning and maintenance, reasonable consumption of high and low pressure gas, achieve the best energy consumption control. Simple and reliable manipulators: The cam-linked picker and picker robots are simple, highly coordinated, and have a low manufacturing cost. Kitchen Soft Closing Pantry Units Kitchen Soft Closing Pantry Units,Pull Out Storage Baskets,Stainless Steel Kitchen Units,Pantry Storage Unit Foshan Gruwill Hardware Products Co., Ltd. , https://www.gwwirebasket.com
The preform feed: the preform is poured into the storage hopper, the conveyor belt automatically lifts the preform to the blank, and then the preforms are neatly arranged on the guide rail, and the good preforms automatically enter the equipment by gravity. Heating delivery. Automatically control the billet, high billet efficiency without damaging the preform.