The imitation bronzing paste printing is to print a pearl-like substance on the fabric, which emits pearl-like luster under the sunlight or strong light, embellishing a dazzling printing pattern. It uses a titanium film as a medium, coated with a special material of titanium dioxide, and then coated with a brightener, the refractive index can reach 3.6. Titanium dioxide has good compatibility with chemical substances such as clothing additives, acid resistance, high temperature resistance, good hand feel, and has a good flash effect. The imitation bronzing paste made has good stability and will not darken after long-term exposure to air. The imitation bronzing paste is widely used, the operation method is simple, it can save energy, will not cause secondary pollution, realize clean production, and is an emerging environmentally friendly printing material. Printing process of imitation bronzing paste: Picture → drying net (80 mesh ~ 100 mesh) → color adjustment → primer → printing → drying → finished product In the process of using imitation bronzing paste, first of all, when toning, use water-based colors to directly adjust the color in the paste according to the requirements of the design pattern; In use, according to the flat surface of the substrate, first use transparent paste as the base, and then overprint the imitation bronzing paste. After the printing process is completed, it can have the effect of bronzing paste bronzing printing, and imitation bronzing paste printing has better water resistance and abrasion resistance than bronzing paste printing. Compared with bronzing printing, imitation bronzing printing has the following advantages: ①The printing process of imitation bronzing paste is simple, and the printing can be formed at one time. The bronzing printing process must first print bronzing paste and then heat transfer bronzing, the process is relatively complex. 60 ℃ / 100min bronzing paste printing imitation bronzing paste printing washing water 1 time the brightness starts to decrease the brightness does not change the washing water 2 times the bronzing foil starts to fall off the brightness does not change the washing water 3 times the bronzing foil drops a lot of the brightness remains unchanged 4 times bronzing foil is basically unchanged ⑤Imitation bronzing paste can produce excessive colors through the dots, and the color tone can be adjusted at will during printing. The imitation bronzing paste printing has the superiority that traditional bronzing printing cannot compare with, and it will be more and more widely used, adding a bright and beautiful landscape to clothing printing. Ji'An ZhongXiang Natural Plants Co.,Ltd. , https://www.jazxnaturaloils.com
â‘¡Environmental protection of imitation bronzing paste. And the PE film left after the hot stamping process transfers hot stamping foil has a certain pollution to the environment.
â‘¢ The elasticity of imitation bronzing paste is better than bronzing foil.
â‘£ Washing fastness after imitation bronzing paste printing is much superior to bronzing paste to bronzing foil printing. The comparison of the washing fastness of the two is as follows: